You have been contacted by a medium sized medical center to do a site survey of their existing WLAN. The current network is set up with multiple SSIDs/VLANs to separate voice and data and the networks functioning properly. The medical center would like to add Vocera voice badges to the existing VoWLAN. Which two issues need to be considered during the site survey? (Choose two.)
A. The additional voice endpoints may increase additional load, which may increase delay in the WLAN and cause voice quality to degrade.
B. There will not be any issues due to adding the Vocera voice badges because they are point-to- point devices and do not require the infrastructure to communicate.
C. Verify the WLAN is multicast enabled for Vocera voice badges.
D. To make these devices as efficient as possible, the Vocera voice badges should be placed on their own unicast SSID/VLAN.
E. Verify the WLAN that is being used by the Vocera voice badges is configured in the WLC to use the Gold QoS value.

Correct Answer: AC Section: (none) Explanation
You have a client that would like to upgrade their 2.4-GHz point-to-point wireless bridge link between buildings in their facility in Mexico. Currently, they have radios from vendor A that are transmitting at 14 dBm with 6 dBm antennas. They would like to upgrade the radios to vendor B but keep the existing antennas. The new radios from vendor B have a fixed transmit power of 7 dBm. How should you proceed?
A. Install the new radios with existing vendor A antennas.
B. Install new radios with replacement vendor A antennas rated at 13 dBm.
C. Install new radios with replacement vendor A antennas rated at 30 dBm.
D. Install the new radios with new vendor B antennas rated at 29 dBm.
E. Install the new radios with new vendor B antennas rated at 13 dBm.

Correct Answer: E Section: (none) Explanation
Which three types of infrastructure issues need to be verified prior to performing a wireless site survey? (Choose three.)
A. MDF and IDF closet locations and if the cable that runs from each closet can reach the proposed AP locations.
B. Available riser capacity for additional backbone cable connections
C. VLAN and IP address deployment strategy
D. Status of QoS deployed
E. Electrical capacity for each MDF and IDF
F. HVAC capacity for each MDF and IDF
G. Locations of application servers

Correct Answer: ACD Section: (none) Explanation
Explanation/Reference: QUESTION 4

Which three things do you need to consider prior to performing a wireless site survey? (Choose three.)
A. The time required to acquire any additional infrastructure components.
B. The time required to survey each potential AP location.
C. The time required to assess application server locations at the customer facility.
D. The type of wireless survey tools required to perform the site survey.
E. The time required to assess customer WLAN density and throughput requirements.
F.     The time required to utilize the design mode in Cisco WCS to prepare a preliminary WLAN design to reduce on-site survey time.

Correct Answer: BDE Section: (none) Explanation
Aside from software applications, which two tools will be important to have when performing a WLAN site survey? (Choose two.)
A. Measuring tools
B. Temporary attachment devices (tie-wraps, clamps, duct tape)
C. Architectural design drawings
D. Different sizes and types of wrenches and pliers
E. Portable battery packs to power WLAN clients
F.     Flag tape to outline wireless cell dimensions

Correct Answer: AB Section: (none) Explanation
Which three basic pieces of information will you need to perform a WLAN site survey? (Choose three.)
A. How many customer user interviews will be required?
B. Which network hardware vendor do they currently use for their infrastructure?
C. What is the location of the facility that needs to be surveyed?
D. What financial information will my company need to provide to the customer?
E. How many engineers will be required to perform the work?
F.     What is the expected timeline to complete the project?

Correct Answer: CEF Section: (none) Explanation
What is the recommended method to protect a wireless outdoor bridge from lightning?
A. Install the wireless outdoor bridge in a grounded NEMA enclosure.
B. Install the wireless outdoor bridge inside a building if possible and only have the antenna outside.
C. Install a fiber-optic link between the wireless outdoor bridge and the antenna.
D. Install a one-meter segment of fiber-optic cable with a copper-to-fiber-optic transceiver to isolate the wireless outdoor bridge from the network cable plant.
E. Install a protection frame in the copper portion of the network cable plant to act as a lighting arrestor.

Correct Answer: D Section: (none) Explanation
Which three statements describe WLAN RF interaction with environmental situations? (Choose three.)
A. Outdoor rain or indoor humidity affects diffraction.
B. Outdoor rain or indoor humidity affects attenuation.
C. RF frequency is inversely related to attenuation.
D. RF frequency is directly related to attenuation.
E. The human body affects diffusion.
F. The human body affects attenuation.

Correct Answer: BDF Section: (none) Explanation
Which piece of information gathered during a WLAN site survey should be included in the customer report?
A. Analysis of server location and applications supported.
B. Analysis of fiber-optic backbone infrastructure.
C. Output from Cisco WCS Location Quality Inspector.
D. Output from Cisco WCS VoWLAN Voice Readiness Tool.
E. Output from Cisco WCS Planning Mode Tool.

Correct Answer: E Section: (none) Explanation
Which option will allow the maximum 2.4 GHz channel usage for a survey and voice deployment in the ETSI domain?
A. 1, 6, 11
B. 1, 5, 9, 13
C. 1, 6, 9, 14
D. 1, 6, 11, 14